The 65 cm or 85 cm antenna dish of the Oyster® system provides TV and radio programmes throughout Europe, in Northern Africa and the Middle East. The innovative swivel-head technology ensures extremely reduced power consumption , lower space requirement and optimised mechanical load.
The centerpiece of the satellite antenna is the LNB, which bundles and processes the satellite signals. According to your individual needs , this high performance module is available in different variants . For example, if you want to use a second receiver, e.g. in the sleeper compartment. The TWIN-LNB allows two different programmes to be viewed using a second receiver.
For optimal reception at the limits of the reception ranges in South-Western and South-Eastern regions, the LNB may have to be rotated in order to compensate the polarisation deviation - or SKEW angle - caused by the earth’s curvature.
The perfect integration of satellite antenna and TV set
The new „Oyster® TV" systems, which perfectly matches to the premium satellite systems, offers customers some unexpected advantages. For example, all of the functions on both devices can be operated with a single remote control. The days of handling two remote controls for one set-up are over.
The system remote control features an integrated controller that can be used to choose stations at the push of a button, whilst simultaneously communicating with the satellite antenna and sending a command to search for the relevant satellite. The satellite antenna starts up, a fully-automated search starts, and after just a few seconds the satellite is identified and reception of the required channel starts.
The integrated HD tuner offers signal processing via the commonly used DVB-S and DVB-S2 standards and reproduces programmes in top HD quality all across Europe.
In addition, the integrated CI / CI+ module slot also enables reception of TV stations (including Pay-TV) from almost all countries in Europe.
The LED panel displays show crystal-clear images with radiant colours.
Using the USB ports, you can record ongoing programmes on an external hard disk for time-shifted playback. Of course, you can always record your favourite programme.
And you can listen to your favorite radio station in optimal sound quality even when travelling abroad.
Available in three sizes:
- „Oyster® TV“ 19“ / 49.5 cm GB_Data-Sheet_Oyster-TV-19
- „Oyster® TV“ 21.5“ / 55 cm GB_Data-Sheet_Oyster-TV-21-5
- „Oyster® TV“ 24“ / 60 cm GB_Data-Sheet_Oyster-TV-24
- „Oyster® TV“ 32“ / 81 cm GB_Data-Sheet_Oyster-TV-32
Dimensions (W x H x D): ∼ 15.1 x 4.6 x 11.5 cm
This fully automatic control center located inside the vehicle contains all the control electronics of the satellite system and can be hidden by its flat design housed in the cabinet.
Cable connection set (5 m)
The cable kit connects the satellite antenna to the control unit. It includes power cords for activating the system and a double-shielded satellite-capable HF cable. The cable kit can vary, depending on the model.
Mounting plate 50 x 37 cm
All ten Haaft antennas are installed on anodized aluminum mounting plates. As these mounting plates are bonded to the roof using a special adhesive, additional boltholes in the outer vehicle skin are not necessary. There are four studs on the mounting plate to where the system is fastened with four cap nuts. This makes it easy to remove the system from the roof for potential repair work – or when every inch in your garage or carport counts.
Operating- and mounting instructions
Of course we deliver our products always with the appropriate manual.Thus you can read all settings and operations in detail.
The mounting instructions contains detailed information about the installation of the satellite antenna.