Dish

Parabolic antenna:

The 65 cm or 85 cm antenna dish of the Oyster® system provides TV and radio programmes throughout Europe, in Northern Africa and the Middle East. The innovative swivel-head technology ensures extremely reduced power consumption , lower space requirement and optimised mechanical load.

 

LNB:
The centerpiece of the satellite antenna is the LNB, which bundles and processes the satellite signals. According to your individual needs , this high performance module is available in different variants . For example, if you want to use a second receiver, e.g. in the sleeper compartment. The TWIN-LNB allows two different programmes to be viewed using a second receiver.

For optimal reception at the limits of the reception ranges in South-Western and South-Eastern regions, the LNB may have to be rotated in order to compensate the polarisation deviation - or SKEW angle - caused by the earth’s curvature.

 

Oyster V Premium


„Oyster® TV“

The perfect integration of satellite antenna and TV set

The new  „Oyster® TV" systems, which perfectly matches to the premium satellite systems, offers customers some unexpected advantages. For example, all of the functions on both devices can be operated with a single remote control. The days of handling two remote controls for one set-up are over.

The system remote control features an integrated controller that can be used to choose stations at the push of a button, whilst simultaneously communicating with the satellite antenna and sending a command to search for the relevant satellite. The satellite antenna starts up, a fully-automated search starts, and after just a few seconds the satellite is identified and reception of the required channel starts.

The integrated HD tuner offers signal processing via the commonly used DVB-S and DVB-S2 standards and reproduces programmes in top HD quality all across Europe.

In addition, the integrated CI / CI+ module slot also enables reception of TV stations (including Pay-TV) from almost all countries in Europe.

The LED panel displays show crystal-clear images with radiant colours.

Using the USB ports, you can record ongoing programmes on an external hard disk for time-shifted playback. Of course, you can always record your favourite programme.

And you can listen to your favorite radio station in optimal sound quality even when travelling abroad.

Available in three sizes:

- „Oyster® TV“ 19“ / 47 cm GB_Data-Sheet_Oyster-TV-19

- „Oyster® TV“ 21.5“ / 55 cm GB_Data-Sheet_Oyster-TV-21-5

- „Oyster® TV“ 24“ / 61 cm GB_Data-Sheet_Oyster-TV-24

- „Oyster® TV“ 32“ / 81 cm GB_Data-Sheet_Oyster-TV-32

Oyster TV

Simple operation of your choice

The Oyster® V is controlled by its "brain", the so-called FeatureBox. It takes care of all calculations and system control. With the Vision variant, communication with the FeatureBox takes place via the control panel, with the Premium With the Vision variant, communication with the FeatureBox takes place via the control panel, with the Premium model you can use the remote control of the TV set. Or just use the special app to control the system via your smartphone. You can switch the antenna on and off, change to a different satellite or view the system settings from outside the vehicle.

The FeatureBox not only offers more options than any of the previous controllers, it also boasts a sleeker design.

Abmessung Bedienteil ohne Montagerahmen (B x H x T): 11,8 x 7,1 x 0,8 cm
Abmessung Bedienteil mit Montagerahmen (B x H x T): 12 x 7,3 x 1,9 cm
Abmessung FeatureBox (B x H x T): 19,5 x 2 x 11,6 cm

Simple operation of your choice


One cable is enough

When we talk about a "single-cable solution", we actually mean it. There is no second cable for power supply. The only cable that is needed is a special coaxial cable that conducts all currents and signals required for control, power supply and signal transmission to the top unit. As such, vehicle installation requires only minimal intervention.
A single pass-through is enough.

For the TWIN option, a second coaxial cable is used.

Oyster V cable

 


Mounting plate 50 x 37 cm

All ten Haaft antennas are installed on anodized aluminum mounting plates. As these mounting plates are bonded to the roof using a special adhesive, additional boltholes in the outer vehicle skin are not necessary. There are four studs on the mounting plate to where the system is fastened with four cap nuts. This makes it easy to remove the system from the roof for potential repair work – or when every inch in your garage or carport counts.

Mounting plate

Operating- and mounting instructions

Of course we deliver our products always with the appropriate manual.Thus you can read all settings and operations in detail.

The mounting instructions contains detailed information about the installation of the satellite antenna.

 


3 years warranty and reliable service

Made in germany

Technical changes reserved