Software updates - Oyster® V

Note
Please read the respective software description carefully before performing software updates. The system will usually not function with the wrong software. Please contact ten Haaft if you have any questions: +49 (0) 7231 58 588 0

Control panel V5 + FeatureBox

Production year from ∼ 2017

Software update via USB-Stick

The FeatureBox as well as all other electronic components of the system can be updated via USB stick.

To do so, make sure that the system is switched off and then plug the USB stick containing a specific container file (UF file) into the USB port and switch the system back on:

Download of the firmware for the FeatureBox (1452235 - 05.10.2018)

 

The update procedure is described in detail in the following:

Download of the update description of the FeatureBox

 

If your Internet browser cannot download the *.uf file, then you may use the *.zip file available from the following link as an alternative:

Download of the firmware of the FeatureBox (zipped version)

Note that after downloading the zip file must be unzipped onto the USB stick.

 

„Oyster® TV“

Production year from ∼ 2014

1.1 Channel lists for „Oyster® TV" sets (via USB flash drive)

Important note:
Please read the respective description carefully before performing software updates. Please follow the instructions precisely as non-compliance could result in functional defects of the system.

Download the Description Channel list Update on Oyster TV
Channel list for Germany, Austria and Switzerland (Version: 23.04.2015)
Channel list for Great Britain (Version: 23.04.2015)
Channel list for Norway, Sweden, Denmark und Finland (Version: 13.06.2017)
Channel list for France (Vision: 15.12.2016)
Channel list for Czech Republic (Vision: 02.08.2017)

 

1.2 Firmware for „Oyster® TV" sets (via USB flash drive)

Important note:
Please read the respective description carefully before performing software updates. Please follow the instructions precisely as non-compliance could result in functional defects of the system.

Download the Description Firmware Update on Oyster TV
To the download for Oyster TV firmware

 

2. Software update for antenna:

FeatureBox

Production year from ∼ 2017

Softwareupdate via USB-Stick

Software update via USB stick

The FeatureBox as well as all other electronic components of the system can be updated via USB stick. This requires the USB stick with a specific container file (UF file) to be plugged into the USB port before switching the system on:

Download of the firmware for the FeatureBox (1452235 - 05.10.2018)

 

The update procedure is described in detail in the following:

Download of the update description of the FeatureBox

 

If your Internet browser cannot download the *.uf file, then you may use the *.zip file available from the following link as an alternative:

Download of the firmware of the FeatureBox (zipped version)

Note that after downloading the zip file must be unzipped onto the USB stick.

Oyster TV